Tech: Easy T1N EGR Delete

(These are intended to be informational for testing purposes. We are not liable for anything you do to screw up your van. Test and experiment at your own risk. For offroad purposes only.)

Here’s an easy EGR delete for T1N Dodge or Freightliner Sprinter Vans (USA)

This is specifically for the EGR on a 2006 using just a single 2.5 K-ohm, 1/2 watt resistor.

Instructions:

Install the resistor on the round side of the plug as pictured.

Test drive the Van

Waterproof the end of the connector and resistor silicon tape

(pretty easy huh?)

You can test it by removing the resistor and and leaving the connector unplugged. It should run great with the resistor and terrible without.

We are not a fan of deleting emissions equipment. But the EGR on the T1N isn’t the best thing for the performance of these engines.

This can be used an emergency if the EGR fails or if you’re troubleshooting MAF issues and ruling out the EGR.